Ceramic Body Binder market status quo
At present, Ceramic Body Reinforcing on the market generally exists in high viscosity or tactitory, which greatly affects mud to play and easily causes product performance to reduce or fail. The body's whiteness even causes the Body's sandwich or black-hearted phenomenon, which seriously affects product quality.
In this regard, Goway strongly hopes to develop a new Ceramic Body Binder, which can greatly improve the Ceramic Body's strength and have both decomposition effects when avoiding the above defects. Given that we have experienced many years of continuous research, we finally successfully launched the Goway efficient Ceramic Border. The launch of this product is the gospel of the ceramic industry.
Goway Ceramic Body Binder has the following advantages:
且 It is easy to dissolve in water and has no viscosity in the water solution. At the same time, it also has an alcoholic ability. After adding the mud, the mud flow rate increases by 5-10 seconds to increase the intensity of the Wet Ceramic Body and the finished product. Damage, jumping, and layered phenomenon.

It can reduce the amount of Ceramic Deflocculant reduce the moisture content of the mud, and save the high energy consumption of the spray dry tower.
Because Ceramic Body Reinforcing is good, it can achieve the use effect with the mud or mixed stirring with the mud or mixing the outside, which greatly improves the range of operation and use efficiency.
After adding the mud, the product does not easily rot for a long time, and there will be no storage time for wood or cellulose storage time to fail or greatly reduce the effect without more than 24 hours.
The intensity increases obviously, and there is no wood or cellulose reinforcement agent to cause sandwich or black-hearted phenomenon;
For green and environmentally friendly products, compared to wood and cellulose without odor and dust, it is conducive to the improvement of the operating environment and the physical and mental health of operators.
After adding the mud, it can further improve the mud tactics, reduce its trigger, and help its production control the slurry and transportation.

FG-ZM01 Ceramic Body Binder is a high-efficiency Ceramic Body Binder developed by Goway-based clustering organic polymer-based co-polymer-based co-polymer organic polymer materials.
Ceramic Body Binder Performance Features:
1. Add Goway's Ceramic Body Binder 0.15 ~ 0.3%(specifically adding the properties of mud and product needs), which can enhance Ceramic Dry Body strength (30%~ 70%), cracking, regulating mud density, and easy to mold for molding. Essence
2. This enhanced agent does not affect the flow rate of the billet slurry. During the use of many factories, all slurry viscosity decreases accordingly.
3. After using Goway Ceramic Body Binder, the spray-dry powder particle-grants are greatly improved. The ultra-fine particles and large particles are significantly reduced, and the 40-80 destination particles increase significantly.
4. The weight of the powder after drying has a significant improvement, showing that it can reduce the hollow rate in the powder after using our company Ceramic Body Binder.
5. It has a significant improvement in solving defects such as CERAMIC BODY easily rupture, granular cracks, insufficient density, low strength, uneven dry water, and contraction and cracking; it can improve the product rate of the product and have no adverse effects on burning.
6. Using a Gowan Ceramic Body Binder can appropriately reduce the requirements and dependence of clay quality.
Ceramic Body Binder's appearance and main indicators:
1. Yellow or brown powder and granules;
2. The melting point is 300 ° C; the proportion: is 0.5 ~ 0.6 g/cm³; it is easy to dissolve in water, and the solution is light yellow-green transparent.

parameter

Ceramic Body Binder How to use:
Put the ball grind with the formula
Ceramic Body Binder Applicable range:
Building tiles such as floor tiles, large-scale polishing tiles, quartz porcelain, daily craft ceramics, sanitary ware, and various CERAMICS BODYs with high content of barren raw materials are available.
Example description:
Use manufacturer data comparison:

Packaging, storage, transportation, and precautions
Plastic film inner bag and film fiber outer bag seal packaging: 25 kg/bag
This product has strong moisture absorption and is highly combustible. During the storage and transportation process, we should strictly pay attention to moisture-proof fire prevention.